• (+86)21 80399582-801
  • Emergency Industrial Park,Wenzhou, Zhejiang , CN
  • tech.sales@leadingtec.cn

Automatic pH Controller

Automatic pH Controller

Automatic pH control systems often use a programmable controller as the regulator, and can take several inputs at once, such as pH, inflow rate, tank level and control-valve status. The control system processes these inputs and, from the measured pH, accurately calculates the required dose of neutralizing agent and controls chemical addition. Automatic pH control is used in many industrial processes and wastewater treatment.

Automatic pH control systems often use a programmable controller as the regulator, and can take several inputs at once, such as pH, inflow rate, tank level and control-valve status. The control system processes these inputs and, from the measured pH, accurately calculates the required dose of neutralizing agent and controls chemical addition. Automatic pH control is used in many industrial processes and wastewater treatment.

Schematic of the automatic pH control unit
Automatic pH control unit

 

pH-dosing control flow chart

 

pH-dosing control flow chart
pH-dosing control flow chart

 

Product overview

pH/ORP can be monitored online and transmitted remotely to a control room via RS485 or a 4–20 mA current loop for recording and storage. This pH/ORP meter is an intelligent online chemical analyser widely used for continuous monitoring of pH or ORP and temperature in thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceuticals, biochemistry, food and tap-water applications. Continuous data can be sent via the transmitter output to a recorder for remote monitoring and logging, or connected through an RS485 interface using the MODBUS-RTU protocol for convenient computer monitoring and recording.

Features

■ Modular board design makes assembly and configuration more convenient.

■ Uses a 2.4-inch 128×64 dot-matrix screen

■ Isolated transmitter output, with less interference

■ Isolated RS485 communication

■ pH/ORP measurement, temperature measurement, high/low-limit control, transmitter output and RS485 communication

■ Configurable manual or automatic temperature compensation

■ High and low alarms can be set, with hysteresis.

■ Buzzer and LCD backlight on/off functions can be set.

■ A master-password function is included.

■ Industrial watchdog timer, ensuring the instrument does not freeze

 

Technical indices of the automatic pH control unit
Technical indices of the automatic pH control unit

Reviews

There are no reviews yet.

Be the first to review “Automatic pH Controller”

Your email address will not be published. Required fields are marked *